Ducati 959 Panigale Forum banner

2019 959 wont start after a stand still drop. Help !!

1262 Views 3 Replies 3 Participants Last post by  Norwalk13
Hi guys,
So I dropped my bike couple days ago 😢. Cosmetic damage is minimal ( dropped on left side) however the bike won’t start. I tried to diagnose so far nothing changed. Fuel pump works when turn key, but no sound or click noise when I press the start button. I tried to jump the battery with my car didn’t work. I changed the kick stand sensor no luck. Any thoughts ? People told me check the clutch switch but it looks fine?
Thanks
1 - 4 of 4 Posts
Try starting it at the relay, if it starts then you need to check if the starter button is sending the signal to the ecu. I had a similar issue after a crash at the track, it turned out to be the signal wire had pulled out of the connector just enough to stop making contact. But it is usually the sign of a dead battery which is what I'd be looking at first.
Hi guys,
So I dropped my bike couple days ago 😢. Cosmetic damage is minimal ( dropped on left side) however the bike won’t start. I tried to diagnose so far nothing changed. Fuel pump works when turn key, but no sound or click noise when I press the start button. I tried to jump the battery with my car didn’t work. I changed the kick stand sensor no luck. Any thoughts ? People told me check the clutch switch but it looks fine?
Thanks
Try disconnecting battery for a bit and it should reset ecu
Try disconnecting battery for a bit and it should reset ecu
Also good for thought on mine I pulled a wheelie shortly after I bought it when I came done it started spitting and misfiring took straight to shop turned out that the spark plug wire was punched by tank so one cylinder wasn’t firing nor would bike start. Possibly same with yours lift tank and double check see anything out of place from impact!! Good luck 👍
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top