Ducati 959 Panigale Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
Need to take off my front wheel and want to know:
1. The size of the front wheel nut, and
2. What size is the Allen key for the Brembo Calipers
Is this a typical Ducati thing where all bolts and nuts have odd sizing?
Thanks
 

·
Registered
Joined
·
1,932 Posts
Download the Service Manual - the information is in there - you can find it on a thread here if you search
 

·
Registered
Joined
·
892 Posts
I'm not sure they're oddly sized? Aside from some Torx head bolts, I haven't come across any bolts that aren't normal. I'm pretty sure they're a standard metric, and fairly standard across all manufacturers. It's not like Ducati manufactures forks and calipers and makes a proprietary fastener requirement.

A quick search will get you the front wheel nut size, but here's a freebie:

Caliper bolt size isn't odd, your toolset is probably just are 1 or 2 sizes too small. The workshop manual has the size and torque spec (both pre-tight and tightening) on roughly page 55.
 
1 - 3 of 3 Posts
Top