Ducati 959 Panigale Forum banner

Changing EU Exhaust

4348 Views 2 Replies 3 Participants Last post by  Joker
Came across this on VisroDown

The good news is that a 1299 Panigale’s exhaust will fit the 959, meaning you might be able to find a keener-priced replacement than buying new from the factory. However, unfortunately you won’t be able to swap it without also replacing the 959’s belly pan, which on the EU-spec 959 is different to the US-spec 959 and 1299 models.
Not sure if that means you can make due with an EU-spec 1299 belly pan, or if you need to try and get a 959 US spec pan shipped over.

(although I guess they should sell something compliant with the Racing AKra)
1 - 3 of 3 Posts
Came across this on VisroDown



Not sure if that means you can make due with an EU-spec 1299 belly pan, or if you need to try and get a 959 US spec pan shipped over.

(although I guess they should sell something compliant with the Racing AKra)
Most probably you can get one US pan in Europe, without having it shipped from the US as the Akra racing exhaust is available in Europe too, hehe.

The 60mm diameter is the same as the 1299, but most probably you will need a remap specifically for the 959. However, will it be compliant with the Euro 4 if you adapt a 1299 aftermarket exhaust?? :S

If Ducati hasn't been able to do it...
The official Ducati 959 under slung replacement kit comes with the lower fairing parts.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top