Ducati 959 Panigale Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter #1
If anyone has the DP rearsets installed were you able to safely run the shifter rod in the middle hole (shorter shift position)?

Mine looks like the nut would be very close to the swingarm so have it in the top hole now but the throw is quite long
 

Attachments

·
Registered
Joined
·
892 Posts
Can you test the difference temporarily? Based on the position of the pivot, the shifter throw improvement can't be more than 10 degrees.
 

·
Registered
Joined
·
38 Posts
Discussion Starter #4
I tried it yeah and the difference was noticeable as the fulcrum point is quite reduced

I think it Would clear the swingarm
With a button head bolt through the opposite way. A 1199/1299 swingarm maybe has more clearance
 

·
Registered
Joined
·
22 Posts
See what you mean by the clearance with the nut on the inside. Mine looks like it clears the swingarm when pivoted but not by much. Seems strange it has to be that close. Let me know if you come up with an alternative. I’ll take a look at mine again.

Cheers
 
1 - 5 of 5 Posts
Top