Ducati 959 Panigale Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
41 Posts
Discussion Starter #1
Hi I have euro 4 spec 959 and have changed exhaust to US spec underbelly.Ihave removed exhaust valve cable and left open,the error light has come since changing,will it be ok to run bike.
 

·
Registered
Joined
·
1,903 Posts
you should have the ECU remapped or it might run "off" a little - either lean or rich at times
 

·
Super Moderator
Joined
·
556 Posts
No worse than an untuned slip on or high flow intake...

I wouldn't worry
 

·
Registered
Joined
·
892 Posts
I believe the error light is just indicating that the exhaust servo is disconnected. I don't remember reading on here if anyone's done it, but you could probably get a servo eliminator to spoof the ECU. Similar: Moto Creations Exhaust Servo Eliminator - Ducati.ms - The Ultimate Ducati Forum


Like @Dingo and @Kevin.H said, its just a minor tuning problem otherwise from the "upgrade" and shouldn't cause any real problems.


Edit: Huge thread from 899 here: http://www.899panigale.org/forum/899-panigale-general-discussion/2930-has-anyone-removed-exhaust-flapper-yet.html
 
1 - 4 of 4 Posts
Top