Ducati 959 Panigale Forum banner

Please help, Termignoni D129

736 Views 15 Replies 2 Participants Last post by  Jucati 959 corse
Can I get Termignoni slipon from 899/1199 to my 959 ? No cat
1 - 16 of 16 Posts
Only if you use a 899/1199 exhaust system. I have not seen a collector for the 959/1299 and that slipon system.
If that is a D155Y2 it only fits the D155 slipon, someone on here tried to fit it to a D129 system and it would not work.
If you want a Termignoni D129 system on your 959 you have two options, 1: get the slipon and a stock 899/1199 header off of ebay or something, 2: get the full system for a 899/1199.
Maybe if we take out -these ears from D129
Different angle, not going to work. They do sell the stainless header separately, so if you find a good deal on a used slipon you can buy the header separately. Part# 96480151A
That is a 3 bolt 899/1199 flange, 959/1299 has a different flange.
ya, I know...question is if we change flange from 899 to 959....godd welder can do it
Yeah, a fabricator could combine a D129 & D155Y2 and get it to fit a 959. But at that point you would have to have gotten a hell of a deal on the D129 and absolutely hate the Akrapovic system.
That is a 3 bolt 899/1199 flange, 959/1299 has a different flange.
Is the flange only problem with D129 ?
Is the flange only problem with D129 ?
Yeah, just the collector/flange is the problem. Nobody that I can find makes a 959/1299 V-band flanged collector for the stock exhaust & D129 slipon. Just be aware the angle & length of the flange may be different between the two collectors. It may or may not be a easy as just swapping flanges on the collector, but that's nothing a good fabricator can't figure out and fix.
Yeah, just the collector/flange is the problem. Nobody that I can find makes a 959/1299 V-band flanged collector for the stock exhaust & D129 slipon. Just be aware the angle & length of the flange may be different between the two collectors. It may or may not be a easy as just swapping flanges on the collector, but that's nothing a good fabricator can't figure out and fix.
Thanks
  • Like
Reactions: 1
1 - 16 of 16 Posts
Top