Ducati 959 Panigale Forum banner

Rear Seat Cowl installed

31K views 30 replies 15 participants last post by  dngo87 
I was able to finally get my seat cowl last week and through the excellent instructions posted by avigil, the installation went through without a hitch.

Here are some pics of the install:
 

Attachments

Pic 1 shows the parts that should be removed/replace.

Pic 2 shows the two 3mm hex bolts you need to remove which will then allow you to lift up the black plastic piece and see the 3rd 3mm hex bolt that you also need to remove.

Pic 3 shows what you should be seeing after the removal of the black plastic.

Pic 4 to 7 shows a before and after view.

Btw, the instructions of avigil regarding the insertion of the tool kit in the space prior to insertion of the seat itself proved to be spot-on as well!

Cheers to you Avigil!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top