Ducati 959 Panigale Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
So trying to put pillion pegs on. 2 bolts under exhaust. Got 1 out other is rounded out. Any ideas how to get it out.

Can't really dremel a grove coz the location and that black raised washer thing.
 

Attachments

·
Super Moderator
Joined
·
556 Posts
Center punch and a hammer

Gonna want a punch that's minimum 6" to reach in there and still grip it well.
 
  • Like
Reactions: jleosnow

·
Super Moderator
Joined
·
556 Posts
Quick google search yielded this:


Not the best example but you should get the gist of it...
 
  • Like
Reactions: jleosnow

·
Registered
Joined
·
1,919 Posts
I suggest you use a large screw extractor - treat the hollowed out bolt as the hole you've drilled to fit the screw extractor

Should be simple - you might want to heat the bolt up first
 

·
Registered
Joined
·
892 Posts
Bolts in that vicinity just seem to be made of aluminum. Such an unfortunate occurrence.
 

·
Registered
Joined
·
25 Posts
So trying to put pillion pegs on. 2 bolts under exhaust. Got 1 out other is rounded out. Any ideas how to get it out.

Can't really dremel a grove coz the location and that black raised washer thing.

Were you able to get the bolt out and how did you do it? I have one under the passenger peg, and the heat shield makes it harder to get anything up there to extract it
 
1 - 7 of 7 Posts
Top