Ducati 959 Panigale Forum banner

Tank protector and mount

6300 Views 8 Replies 5 Participants Last post by  adad11
Today I got my first service done. While it was there, I had them put the tank protector on and the adaptiv technologies mount. I will put an attachment onto it. Then most of the time I will have my phone in that spot. But I should be able to swap it out for my gopro for track use.

Attachments

See less See more
1 - 9 of 9 Posts
Looks good, I plan on doing the tank pad to protect the paint. On my 750 it's pretty scratched up
6
phone cradle attached to phone mount

I attached the phone cradle to the phone mount. The phone mount is the adaptiv technologies mount. I took several pictures, so you can see what it looks like with the phone on in the following positions: behind the bike, straight wheel, turned left, turned right, and the view from sitting upright on the bike. I also took a picture of the phone cradle on the phone mount without the phone in it.

I wanted to give you some perspective of how your phone could fit on the bike if you went with this stem mount approach. BTW, my phone is quite large. It's an LG G Flex 2. I'll ride with it tomorrow for the first time.

Now I need to figure out how/if I feel comfortable running a charging cord up to the phone from the battery tender (mine is on the left side of the bike). I might just mount it and only charge it when I'm off the bike. If I do run a cord, I'll definitely want to attach it at points so that it doesn't dangle at all. Have any of you done this yet?

Attachments

See less See more
For those of us thinking about a tank protector, we may want to read the negative comments from the following 899 forum:
Clear tank Protector.... bad idea! - Ducati 899 Panigale Forum
For those of us thinking about a tank protector, we may want to read the negative comments from the following 899 forum:
Clear tank Protector.... bad idea! - Ducati 899 Panigale Forum
Good thing i bought the ducati tank protector, @DarR those should be fine, correct?
Good thing i bought the ducati tank protector, @DarR those should be fine, correct?
I read that post. It's the reason that I avoided clear, went with the ducati carbon fiber one, and had the dealership install it during my service. The said that if they install it that there's a 2 year warranty on the tank pad. They charged me $25 for installing the tank pad which was worth it for me. I've installed tank pads before and it's pretty easy. But the peace of mine made it worth the $25 for me.
Good thing i bought the ducati tank protector, @DarR those should be fine, correct?
According to Jarel, General Manager Ducati Omaha, they have claimed some on warranty but I'm not puting one on until I complete my due diligence about paint damage potential.
According to Jarel, General Manager Ducati Omaha, they have claimed some on warranty but I'm not puting one on until I complete my due diligence about paint damage potential.
From what I've heard as long as you use a hair dryer to warm the tank protector before you take it off, it shouldn't peel the paint off when removing. But of course complete your research. :)
I attached the phone cradle to the phone mount. The phone mount is the adaptiv technologies mount. I took several pictures, so you can see what it looks like with the phone on in the following positions: behind the bike, straight wheel, turned left, turned right, and the view from sitting upright on the bike. I also took a picture of the phone cradle on the phone mount without the phone in it.

I wanted to give you some perspective of how your phone could fit on the bike if you went with this stem mount approach. BTW, my phone is quite large. It's an LG G Flex 2. I'll ride with it tomorrow for the first time.

Now I need to figure out how/if I feel comfortable running a charging cord up to the phone from the battery tender (mine is on the left side of the bike). I might just mount it and only charge it when I'm off the bike. If I do run a cord, I'll definitely want to attach it at points so that it doesn't dangle at all. Have any of you done this yet?

Hi there,

Could you please tell us the exact model of the Adaptive Tech mount you have there installed on your 959? Is it the type D (D-01-16)?

Thanks.
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top